DIN Standard
Product Introduction
DIN7500 : Thread rolling screw for ISO metric screw
Dimensions and designation
Table 1 : Screw types and designations
The section of the screw enclosed within chain thin double dashed lines shall be designed at the manufacturer's discretion(see 4.3)
Type | llustration | Other dimensions as in | Range of sizes suitable for rolling | Example of designation |
AE | DIN EN ISO 1207 | M3.5 to M10 | Screw DIN 7500-AE M6 x 20-St | |
BE | DIN EN ISO 1580 | M2 to M 6 | Screw DIN 7500-BE M6 x 20-St | |
CE | DIN EN ISO 7045 | M2 to M10 |
Screw DIN 7500-CE M6 x 20-St-Z1 |
|
DE | DIN EN ISO 24017 | M2 to M10 | Screw DIN 7500-DE M6 x 20-St | |
E | DIN 912 | M2 to M10 | Screw DIN 7500-E M6 x 20-St | |
KE | DIN EN ISO 2009 | M2 to M10 | Screw DIN 7500-KE M6 x 20-St | |
1) IF previous designations do not include the symbol H or Z ( to identify the cross recess ). recess type H shall apply. |
Type | llustration | Other dimensions as in | Range of sizes suitable for rolling | Example of designation |
LE | DIN EN ISO 2010 | M2 to M10 | Screw DIN 7500-LE M6 x 20-St | |
ME | DIN EN ISO 7046-2 | M2 to M10 | Screw DIN 7500-ME M6 x 20-St-Z1 | |
NE | DIN EN ISO 7047 | M2 to M10 | Screw DIN 7500-NE M6 x 20-St-Z1 | |
The DIN 4000-2-1 tabular layout of article characterisitics shall apply to screw as coverd in this standard. |