Total : 0

Every kinds of accreditation and patent certification.

katsuhana-certification

Stainless Steel

Stainless Steel Austek

For Hard Wood

No Harden

Bronze Brown

Stainless Steel Austek

For Hard Wood

No Harden

Stainless Steel Austek

For Hard Wood

No Harden

Stainless Steel Austek

For Hard Wood

No Harden

HWH ASD#1PT

Stainless Steel Austek

For Hard Wood

No Harden

Special BIT-5 Star

(Hold Tight)

AUSTEK-TAPE CA AUSTEK Decking Screw-katsuhana

Stainless Steel Austek

New Tape CA

For Steel Plate

No Harden

Austek-Tape CA-drilling test AUSTEK Decking Screw-katsuhana

Austek-Tape CA-for 0.7mm steel plate AUSTEK Decking Screw-katsuhana

AUSTEK-NAIL POINT AUSTEK Decking Screw-katsuhana

Stainless Steel Austek

New Nail Point

For Very Hard Wood

No Harden

AUSTEK-HiLo-T17 AUSTEK Decking Screw-katsuhana

Stainless Steel Austek

Hilo thread T17 point

For Steel Plate

No Harden

The advantages of AUSTEK

Samples : #8 screw WIRE 3.30 mm

ITEM / PARTAUSTEK410 SS302 HQC1022 STEEL
TORQUE( kg/cm ) 63 63 62 63 63 76 78 77 77 78 40 40 41 42 40 69 70 68 72 72 72
CASE HARDNESS( HV ) 380 - 390 674 - 726 380 - 390 613 - 641
CORE HARDNESS( HV ) 376 - 384 400 - 420 SOFT 400 - 430
CORROSION TEST EXCELLENT SO-SO GOOD 24HRS(Ref.)
SHEAR(kgf) 1261 -- -- --
MAGNETISM X V X V
DRILLING PLATE THICKNESS 2mm (Max.) 1.58-1.73mm X 1.58-1.73mm
HARDEN UNHARDEN HARDEN UNHARDEN HARDEN

The advantages of AUSTEK

  • NO CARBURIZATION
  • NO NEED PRE-DRILLING HOLE
  • HIGH TENSILE / HIGH TORQUE/ HIGH SECURITY
  • HIGH ANIT-CORROSION
  • NON MAGNETISM
  • NO EMBRITTLEMENT
  • ACQ TREATED-WOOD COMPLIANCE

RE: 2008 REVOLUTION -New Technology – SUS300 SERIES

Characteristic :

  • 100% Austentic 300 series, high torque and strength,no heat-treatment, non-magnetism, meet ACQ or RoHS compliant,
  • no hydrogen embrittlement, excellent corrosion resistance, competitive pricing

Getting it over and done! From now on!

 AUSTEK410SSC1022
HARDEN X V V
Magnetism X V V
Corrosion GOOD NG NG
Torque Per IFI or DIN ditto ditto
  1. PARTICLE BOARD SCREW Torque strength
  2. CHIPBOARD SCREW Torque strength
  3. TAPPING SCREW Torque strength
  1. #8 -10 Wire 3.05 ave. : 45(kg-cm) = 39 In-lbs
  2. #10 -9 Wire 3.60 ave. : 75(kg-cm) = 65 In-lbs
  3. #M4.0-P1.80 Wire 2.80 ave. : 36(kg-cm) = 31 In-lbs
  4. #M5.0-P2.20 Wire 3.45 ave. : 65(kg-cm) = 56 In-lbs
  5. #8 -18 Wire 3.30 ave. : 59(kg-cm) = 51 In-lbs
  6. #10 -16 Wire 3.80 ave. : 91(kg-cm) = 79 In-lbs
katsuhanan-turn-300

AUSTEK,100% 300

  • 2008 NEW ARRIVAL, REVOLUTION IN SUS 300 SERIES PENERATE
  • NO MORE SUFFER IN THE RUST, AUSTEK,100% 300 SERIES SLOVE IT!
  • UNIQUE “ & THE NO 1. DRILLING ABILITY

The patent AUSTEK is made of SUS 300 series,”NO CARBURIZATION” , because HEATING , which resulted in the stainless steel lost its properties, WITHOUT HEAT-TREATMENT but keep the chemical compounds consistently till finished with high torque, even penetrating the thin steel plate as well as low carbon steel doing well, designated for very hard wood application especially, which compared the difference to the normal stainless steel disadvantage of soft.

Therefore, Austek is the best choice to eliminate red rust, high anti-corrosion, meet ACQ or RoHS compliant, specified worldwide in all the applications of interior or outdoor.

  • STEEL PLATE THICKNESS : 2mm OR 1.5mm X 2
  • Recommended screwgun : 1000 RPM

SPECIFICTION:

katsuhanan-p1-2
  • FINISH : ELECTRO ZINC PLATED & WAX
  • CORROSION TEST : 500 HRS PER ASTM B-117
  • KESTERNICH TEST : 15 CYCLES PER DIN50018

SCBM STAR CONNECTION BI-METAL
LINK-ASSEMBLY, NOT WELDING., NO HEAT-TREATMENT,
THE GENUIE”COLD-FORGED” **STAINLESS STEEL + CARBON STEEL**

SCBM is a new and pending patent. It totally overturns the traditional welding processing originally, most stainless that is “hardened” has to be treated as to welded. However, “SCBM” is without carburization, the original properties of the stainless remain 100% intact, but the genuine “cold-forged”, the failure rate is approximately under 1%.

katsuhanan-scbm-1

NOTE:

  • WITH OR WITHOUT EPDM BONDED WASHER FOR IHWH, FLANGE
  • NOTE : #5 POINT TAP UP TO 12 mm

SIZE:

  • #10-16X1 ~ 3” #3PT
  • #12-14X1 ~ 4” #3PT
  • 1/4-14X1 STICH POINT #1 PT
  • 1/4-14X1 STICH POINT #1 PT
  • 1/4-14X1~6” #3PT
  • 5.5X25 #3PT
  • 5.5X35 #3PT/#5PT
  • 5.5X50 #3PT/#5PT
  • 5.5X60 #3PT/#5PT
  • 5.5X80 #3PT/#5PT
  • 5.5X100~ 200 #3PT/#5PT
  • COMPOSITE PANEL/SANDWICH SCREW/DOUBLE THREAD
  • WITH OR WITHOUT EPDM BONED WASHER
  • 5.5/6.3X60 #3PT/#5PT
  • 5.5/6.3X80 #3PT/#5PT
  • 5.5/6.3X105 #3PT/#5PT
  • 5.5/6.3X125 #3PT/#5PT
  • 5.5/6.3X135 #3PT/#5PT
katsuhanan-scbm-2
katsuhanan-scbm-3
  • 5.5/6.3X150 #3PT/#5PT
  • FINISH : ELECTRO ZINC PLATED & WAX
  • CORROSION TEST : 500 HRS PER ASTM B-117
  • KESTERNICH TEST : 15 CYCLES PER DIN50018
  • HIGH TQRQUE STRENGTH
#6-20#8-18#10-16#12#1/4
38 52 91 145 219

SAFE 300 10.9 CLASS

OVERTURN THE PROPERTY OF STAINLESS STEEL IN YOUR IMAGINE, SAFE 300, “NO HEAT-MENAT” HIGH TENSILE/ HIGH TORQUE, HIGH SECURITY, HI ANTI-CORROSIION, EQUALLY TO CLASS 10.9 IN ALLOY STEEL, BUT IT’S MADE OF SUS 300 SERIES.NON-MAGNETISM, NO EMBRITTLEMENT, NO CONTAMINATION.

Design from customer is welcomed!

AUSTEK Decking Screw