FINE THREAD

DRYWALL SCREW
FINE THREAD
TYPE 17

PHILLIPS BUGLE HEAD-FINE THREAD

SIZE

 DRIVE SIZE 　APPLICATION
# 6  x 3/4"
 # 2 Phillips Original and primary application of D/W to 20-25gauge metal studs. Also known as "all-purpose"or "many purpose" screws.
# 6  x 1"
 # 2 Phillips
# 6  x 1-1/8"
 # 2 Phillips
# 6  x 1-1/4"
 # 2 Phillips
# 6  x 1-5/8"
 # 2 Phillips
# 6  x 2"
 # 2 Phillips
# 6  x 2-1/4"
 # 2 Phillips
# 8  x 2-1/2"
 # 2 Phillips
# 8  x 3"
 # 2 Phillips
#10 x 3-1/2"
 # 2 Phillips Extra-Length allows user to attach D/W to 20-25 gauge metal stud-used in "scab over" applications.
#10 x 3-3/4"
 # 2 Phillips
#10 x 4"
 # 2 Phillips
#10 x 4-1/2"
 # 2 Phillips
#10 x 5"
 # 2 Phillips
#10 x 6"
 # 2 Phillips




PHILLIPS BUGLE HEAD-COARSE THREAD

SIZE

 DRIVE SIZE APPLICATION
# 6  x 1"
 # 2 Phillips Original and primary application of D/W to wood studs.                Also used in many interior wood and fixture fastening applications.
# 6  x 1-1/8"
 # 2 Phillips
# 6  x 1-1/4"
 # 2 Phillips
# 6  x 1-1/2"
 # 2 Phillips
# 6  x 1-5/8"
 # 2 Phillips
# 6  x 1-3/4"
 # 2 Phillips
# 6  x 2"
 # 2 Phillips
# 6  x 2-1/4"
 # 2 Phillips
# 8  x 2-1/2"
 # 2 Phillips
# 8  x 3"
 # 2 Phillips
#10 x 3-1/2"
 # 2 Phillips
#10 x 3-3/4"
 # 2 Phillips
#10 x 4"
 # 2 Phillips
#10 x 4-1/2"
 # 2 Phillips
#10 x 5"
 # 2 Phillips
#10 x 6"
 # 2 Phillips

 

Drywall / Accessory Screws

 
SIZE DRIVE SIZE

APPLICATION
# 6 x 1"
 # 2 Phillips D/W tometal studs-20-27 gauge.Especially effective in "standard duty" studs to prevent screw stripping.Also an excellent fastener for use in wood & plastic applications.
# 6 x 1-1/8"
 # 2 Phillips
# 6 x 1-1/4"
 # 2 Phillips
# 6 x 1-5/8"
 # 2 Phillips
# 6 x 2"
 # 2 Phillips
# 6 x 2-1/4"
 # 2 Phillips
# 8 x 2-1/2"
 # 2 Phillips
# 8 x 3"
 # 2 Phillips
PHILLIPS BUGLE HEAD-LAMINATOR
SIZE DRIVE SIZE APPLICATION

# 10 x 1-1/2"

 # 2 Phillips

Temporary fastening of D/W to D/W in double wall requirements.
PHILLIPS PAN HEAD-FRAMER
SIZE DRIVE SIZE APPLICATION

#  7 x 7/16"

 # 2 Phillips
Light gauge metal stud & track framing.
PHILLIPS TRIM HEAD-"S"POINT
SIZE DRIVE SIZE APPLICATION
# 6 x 1-5/8"
 # 1 Phillips
Finish screw for fastening of base or trim through D/W to light gauge metal studs.
# 6 x 2-1/4"
 # 1 Phillips
# 8 x 3"
 # 2 Phillips

Top

Accessory Screws

SQUARE DRIVE TRIM HEAD-"S"POINT
SIZE DRIVE SIZE APPLICATION
#6 x 1"
 # 1 Sq. Robertson Finish screw for fastening of base or trim through D/W to light gauge metal studs.
#6 x 1-5/8"
 # 1 Sq. Robertson
#6 x 2-1/4"
 # 1 Sq. Robertson
# 8 x 3"
 # 2 Sq. Robertson
MODIFIED TRUSS HEAD-BLACK PHOSPHATE or ZINC PLATED
SIZE DRIVE SIZE APPLICATION
#8  x 9/16"
 # 2 Phillips
For the application of metal lath to light 20-25 gauge metal studs. Recommended drive speed is 2500 rpm.
#8  x 3/4"
 # 2 Phillips
#8  x  1" 
# 2 Phillips
#8  x  1-1/4"
# 2 Phillips
#8  x  1-5/8"
 # 2 Phillips
#8  x  1-7/8"
 # 2 Phillips

CABINET SCREW-BLACK PHOSPHATE
SIZE DRIVE SIZE APPLICATION

# 8 x 2-3/8"

 # 2 Phillips
For Cabinet Installation

#8 x 3

 # 2 Phillips

Self Piercing Screws

HEX WASHER HEAD SLOTTED-ZINC PLATED

SIZE

 DRIVE SIZE
APPLICATION
# 7 x 1/2"
 1/4" Hex
For H.V.A.C. or other thin gauge metal fastener.Screws have a needle point forself piercing of sheet metal in a range of .0209 to .0359.
# 8 x 1/2"
 1/4" Hex
# 8 x 3/4"
 1/4" Hex
# 8 x 1"
 1/4" Hex
# 8 x 1-1/2"
 1/4" Hex
# 8 x 2"
 1/4" Hex
# 10 x 1/2"
 5/16"Hex
# 10 x 3/4"
 5/16"Hex
# 10 x 1"
 5/16"Hex
# 10 x 1-1/2"
 5/16"Hex
# 10 x 2"
 5/16"Hex
TYPE 17
Bugle head : This design provides easy countersinking in a variety of different materials and be driven flush with the materials.
Pan Framing
Trim head : allows esy countersinking. Nibs under the head help countersink the head without splitting.
Modi-truss ( round washer head ) : This provides maximum bearing surface with minimum head height.